Baz Shell informs me that further track work was undertaken yesterday (18th) and the panel near the tunnel is now connected.
60ft rails now plated up and clipped into place
As mentioned previously there are only a limited number of sleepers in this panel as we are low on supplies; the appeal is still running for track materials as we also need further pan11 plates, clips, fishplates and ballast to be able to bring this section of track into regular use. We are also always looking out for new volunteers to boost the numbers. If you’d like to assist with either please drop us a line.
Waverley Route Heritage Association 
Recently sponsored a sleeper. No confirmation of receipt yet, but no doubt it will be put to good use.
By: Maxime on September 27, 2016
at 7:39 am
Thank you for your donation. Will check for you; one of our team is unavailable due to personal issues so that may cause delay.
By: wrha on September 27, 2016
at 7:40 am
Maxime I can assure you that your sleeper will be put in place Sun 09/10, its the last one before the gates !
By: Barry Shell on October 6, 2016
at 1:09 pm
Wonderful news! Thanks for checking!
By: Maxime on October 7, 2016
at 11:21 am
Your sleeper is one of the ones seen on the p-way trolley.
By: wrha on October 9, 2016
at 8:49 pm
Thanks for keeping me posted! But can it be most pictures are not working correctly anymore? I don’t see any trolleys or track panels at the moment.
By: Maxime on October 21, 2016
at 11:40 pm
I am investigating the issue with photos as they show up when I am in the WordPress editor
– DMS
By: wrha on October 22, 2016
at 4:46 am